Steel Grades and Specifications The following
steel grades and specifications are available.
a) Thickness and Width:
| |
Minimum |
Maximum |
Thickness (Gauge)
|
1.0 mm |
13.0 mm |
| Width |
900 mm |
1550 mm |
Possible combination of thickness and width for
different chemistry groups
| Chemistry groups |
Thickness Range
(T) |
Possible Width (W) |
| C < 0.14% |
1.00 mm |
900 < W < 1250 mm |
| 1.01 - 1.50 mm |
W < 600xT + 650 mm |
| 1.51 -13.0 mm |
900 < W < 1550 mm |
| C < 0.29% |
1.20 mm |
900 < W < 1250 mm |
| 1.21 - 2.00 mm |
W < 375xT + 800 mm |
| 2.01 - 13.00 mm |
900 < W < 1550 mm |
| C < 0.29% |
1.50 mm |
900 < W < 1250 mm |
| 1.51 - 2.80 mm |
W < 230xT + 906 mm |
| 2.81 - 13.00
mm |
900 < W < 1550 mm |
b) Width deviation within a single coil will be within ? ASTM A568 tolerances. Details available on request
c) Thickness deviation within a single coil will be within ? ASTM A568 tolerances. Details available on request
d) Product crown within a single coil will lie within +/-50mm. Under certain combinations of chemistry and dimension this value can be as low as +/-20mm. Details available on request
e) Strip flatness within a single coil will lie within 20 I-units. This is equivalent to a 9mm distortion over a 1000 mm wave-length.
| Application
Group |
Thailand
( TIS ) |
Japan
( JIS ) |
United State
of America
( ASTM, SAE ) |
Europe
( EN, BS, DIN ) |
| Commercial/
Drawing |
TIS 528;
HR 1, 2, 3, 4 |
JIS G 3131;
SPHC, SPHD, SPHE |
ASTM A 569
ASTM A 621
ASTM A 622
ASTM A 635; 1006 to 1012
SAE J 403; 1006 to 1012 |
EN 10111;
DD11, 12,13,14
BS 1449; HR 1, 2, 3, 4, 14, 15
BS 1449; HR 34/20, 37/23, 43/25, 50/35
DIN 1614; St 22, 23, 24 |
Sturctural
|
|
|
|
|
| - General
Structure |
TIS 1479;
SS330, 400, 490, 540 |
JIS G 3101;
SS330, 400, 490, 540
JIS G 3136; SN 400 A, B
SN 490 B |
ASTM A 36
ASTM A 283; Gr. A, B, C, D
ASTM A 570; Gr. 30, 33, 36, 40, 45, 50, 55
ASTM A 678; Gr. A, B, C, D
ASTM A 635; 1006 to 1012
SAE J 403; 1005 to 1026
SAE 1015 to 1055
ASTM A 572; Gr. 42, 50, 60, 65
ASTM A 607; Gr. 45, 50, 55, 60, 65 |
EN 10025;
S185, 235, 275, 355
E 295, 335, 360
BS 4360; 40A, B, C
43A, B, C
50A, B, C
DIN 17100; St33, 37-2, 37-3, 44-2, 44-3
50-2, 50-3, 52-3
|
- High Strength
Low Alloy
( HSLA ) |
|
|
ASTM A 572;
Gr. 42, 50, 60, 65
ASTM A 607; Gr. 45, 50, 55, 60, 65 |
EN 10149-2;
S315MC, 355, 420, 460, 500 |
| - Welded
Structure |
TIS 1499;
SM400 A, B,C
SM490 A, B, C, YA,YB
SM520 B, C
SM 570 |
JIS G 3106;
SM400 A, B, C
SM490A, B, C, D
SM520 B, C
SM570 |
|
EN 10113-2;
S275, 355, 420, 460 |
| - Automotive
Structure |
TIS 1999;
SAPH 310, 370, 400, 440 |
JIS G 3113;
SAPH 310, 370, 400, 440 |
ASTM A 715;
Gr. 50, 60, 70 |
EN 10149-2;
S315MC, 355, 420, 460, 500 |
| Formability
for Automotive Structure |
TIS 1884;
SPFH 490, 540, 540Y |
JIS G 3134;
SPFH 490, 540, 540Y |
|
EN 10149-3;
S260NC, 315, 355, 420NC |
| - Machine
Structure |
TIS 1501;
S10C to S58C;S15ck,S20ck |
JIS G 4051;
S10C to S58C |
|
|
| - Pipe &
Tube |
TIS 1735;
SPHT 1, 2, 3, 4 |
JIS G 3132;
SPHT1, 2, 3, 4
JIS G 3444; STK290, 400, 490, 500, 540
JIS G 3445; STKM 11 - 20
JIS G 3461; STB340, 410, 510 |
ASTM A 36
ASTM A 283; Gr. A, B, C, D
ASTM A 570; Gr. 30, 33, 36, 40, 45, 50, 55
ASTM A 607; Gr. 45, 50, 55, 60, 65
ASTM A 588; Gr. A, B, C, D, E, F, K
SAE 1015 to 1021 |
EN 10025,
S235, 275, 355
BS 4360; 40A, B, C
43A, B, C
50A, B, C |
Gas
Cylinder/
Pressure Vessel |
TIS 2060;
SG255, 295, 325, 365, |
JIS G 3116;
SG255, 295, 325, 365
JIS G 3115; SPV235, 315, 355, 410, 450, 490
JIS G 3103; SB 410, 450, 480 |
ASTM A 285;
Gr. A, B, C
ASTM A 414; Gr. A, B, C, D, E, F, G
ASTM A 516; Gr. 55, 60, 65
ASTM A 204 |
EN 10120;
P245, 265, 310, 355
|
| Atmospheric |
TIS 2011;
SPA-H |
JIS G 3125;
SPA-H |
ASTM A 242 |
EN 10155 |
| Corrosion |
|
JIS G 3114;
SMA 400 A, B, C |
ASTM A 606 |
|
| Resistant |
|
SMA 490
A, B, C |
ASTM A 709 |
|
| Cold Rolled
Steel |
|
|
SAE 1006
to 1055
AISI 1006 to 1055 |
|
| Oil &
Gas Pipes |
|
|
API 5L; A,
B, X42, X46, X52, X56, X60, X65 |
|
|
